GTKC 4.3" Fold Monitor + 2.4G Wireless Car Rear Forward Back Side Front View Back up Backup Parking Reversing Camera 100% Waterproof
Mirror Monitor Features:
4.3 "TFT LCD - monitor.
high resolution photos: 480 * 272.
2 video input White video cable connects to car rearview camera, yellow is connected to a DVD or VCD.
When parking the car, the rearview image appears on the screen automatically.
so, i - menu buttons, Brightness and Contrast / Hue / language is adjustable.
language support: English, Chinese, French, Russian, German, Italian, Spanish.
It supports DVD Rental, VCD, camera and other video - equipment.
easy installation without affecting any - any part of the machine: just clip on the texts of the mirror.
Easy installation, no damage to any part of the machine, a clip on the original mirror
No audio input and output.
Screen size 4.3 - inch TFT screen 16: 9
component: color LCD display
number of points: 480w * (* 272h
CCTV system: PAL / NTSC compatible
Power: DC 12V
Rated power consumption: 3c
Operation temperature: - 10 ~ + 50 degrees
Storage temperature: - 20 ~ + 60 ° C
Image sensors: 1/4" color CCD
TV System: NTSC & PAL
Minimum illumination. <0.1
White Balance: Auto
Video Color: Colorful
Effective Pixels : 728x512
Resolution : 480TV lines
Video Output: 1.0Vp-p,75
Electronic Shutter: 1/60(NTSC)-1/10000S, 1/50(PAL)-1/10000S
S/N ratio: Better Than 48db
Lens Angle: 170 Degree
Waterproof Class:Ip 68
Operation Temperature: -20°C+80°C RH95%
Storage Temperature: -30°C+80°C
Working Power (DCV): 12
Current consumption: 90mA Max
About the TV systems of the car rear view camera.
Usually monitors support NTSC and PAL TV systems.So there is not importand the car cameras have NTSC or PAL .Please check that if your monitors can support NTSC or PAL .If your monitor only can support NTSC or PAL ,Please leave us the message which TV system do you need in one business day after you make the payment .If not .We will send the car camera with the TV system to our customers at random.
How to install :
Fix the camera to a special design hole in your car.
Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
Connect the power of the camera to your car reverse lights - red wire to positive and black wire to negative.
Connect the video cable of the camera to the extension cord.
Connect the extension cord to your car monitor.
You will see the images when your car is in reverse shift.
=>Take out your stock license plate light at the back of your car
=>Fix the camera to where the stock license plate light was.
=>You will see the images when your car is in reverse shift.
1x camera NTSC model (4 pin connector)
1x 2.4G Transmitter
1x 2.4G Receiver
1x 4.3" Monitor